SHMST327 | Stronghand Corner Magnet Twin Pack 
Corner Magnets 

Time saving magnetic tools for use in the shop & in the field 

• Description: Twin Pack 
• Max. Pull Force: 14 kg 
• Dimension: 83 x 95 x 16 mm 
• Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds. 
• One side corner “relief” provides clearance for tall lips. 
• Use the outer edges of the Corner Magnet for setting up materials at 60°. 

* Must be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 176ºF / 80ºC. 
*Magnetic force is based on the longest side of Magnet with 3/8? thick steel.