1. Home
  2. Products
  3. SP Tools
  4. SP CORDLESS TOOLS

18v Ultimate Brushless Combo Kit - 6.0AH x2 - SX Drive

SP83195
Was: $2,150.00  +GST 
Now: $1,695.00 +GST
Qty
Available:1999999
18v Ultimate Brushless Combo Kit - 6.0AH x2 - SX Drive
FEATURES :
  • Lightweight compact design featuring next generation SX Drive Technology with increased power and 2m (6.5 ft) drop test durability
  • SX Drive electronic intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity

 

SX CORE MICROPROCESSORS

The core to the SP SX Drive program are the new and improved SX Core microprocessors that offer the ultimate charger to battery to tool interface to improve outright performance. We have embedded microprocessors in all three components to give users longer run times, charge and discharge protection, intelligent current flow and temperature protection. With SP SX Drive using SX Core technology we can offer more work time, more power, more recharges and ultimately better performing tools.

18v 3/4"Dr Impact Wrench - SX Drive - Skin Only - SP83140BU:
  • Bolt Busting Torque: 2,270Nm | 1,675ft-lbs
  • Torque: 1,290Nm | 950 ft-lbs
  • RPM: 0-1500 | BPM: 0-2100
  • Capacity: 3/4” (19mm)
  • Variable speed switch with brake
  • Powerful brushless motor
  • Reversible
  • Ergonomic soft grip handle
  • Weight: 3.2kg | 7.0Lb (Without Battery)
  • Charging Time: 1 hour auto cut-off


18V 1/2"Dr Impact Wrench - SX Drive - SP83133BU:
  • Bolt Busting Torque: 970Nm | 715ft-lbs
  • Working Torque: 690Nm | 509ft-lbs
  • RPM: 0-2200 | BPM: 0-3200
  • Capacity: 1/2” (13mm)
  • Variable speed switch
  • Powerful brushless motor delivering 60 impacts per second
  • Lightweight - 1.54kg | 3.4Lb (without battery)
  • Compact design - Only 169mm (6.6”) long (Including anvil)
  • Reversible
  • Ergonomic high grip handle


18v 13mm (1/2”) Brushless 2 Speed Hammer Drill/Driver - SX Drive - SP83244BU:
  • No-Load Speed: Low - 0-550rpm. High 0-2100rpm
  • Working Torque: 150Nm | 110ft-lbs
  • Adjustable Two speed controller
  • Variable speed trigger
  • 20 selection clutch torque control plus hammer
  • Gear box with spindle lock function
  • Single sleeve keyless chuck
  • Onboard magnetic bit/fastener holder pad
  • Weight: 1.62Kg | 3.5Lb (Without Battery)


18v 125MM (5”) BRUSHLESS 6 SPEED ANGLE GRINDER - SP83311BU:
  • Platform : 18v SX DRIVE
  • RPM (No load Speed) : 10000 | 8000 | 6500 | 5000 | 3500 | 1500 RPM
  • Electronic Control : 6 Speed
  • Wheel Size : 115mm/125mm | 4.5” | 5”
  • Electronic Soft Start: Yes
  • Anti-Restart Protection : Yes
  • Anti-Vibration : Yes
  • Weight (Without Battery) - 1.8kg | 3.9Lb
  • Charge Time : 1 Hour auto cut-off (+10min)


18V LI-ION BATTERY PACK - 6.0AH : SP83996X x 2
  • Longer run time
  • Less charging
  • Power when you need it
  • Stronger coated contacts
  • Longer life - More than double the recharges of normal lithium batteries


12V/18V MULTI-VOLT BATTERY CHARGER : SP83895X
SP Multi function Microprocessor controlled 12v/18v Multi-Volt Battery Charger features a 9 stage control and protection system:
      1. Programmable over-charge voltage

      2. End of charge current

      3. Temperature cut-off

      4. Safety charging time

      5. Receive charge termination signal

      6. Over-charge voltage protection

      7. Over-charge current protection

      8. Short circuit protection

    9. Relay control protection

 

By ComCloud. Connecting businesses through digital commerce